Note: After changing the IP address settings, you’ll need to reboot your modem router, then log back into the modem router with the new IP address. Change the LAN address to one on the main router’s subnet. Click Advanced > Network > LAN > DHCP Server. Input your Wireless Network Name (SSID) and Password, then click Save (bottom left of the screen) to save your changes. Click Advanced on the top navigation bar, then select Wireles s on the left panel.
Tp link router setup how to#
If needed, you may refer to How to log into the web-based interface of the AC VDSL/ADSL Modem Router for more detailed information.
Tp link router setup password#
The default login username and password are both admin (all lower case). Log into the router using or the default IP address 192.168.1.1. Connect your computer to the LAN port of the TP-Link DSL modem router via a cable. Before Step 6, keep the AP disconnected from the Root Router. To avoid connection issues during setup, complete the following steps through a computer wired directly to the router.Ģ.
Tp link router setup manual#
Get to know more details of each function and configuration please go to Download Center to download the manual of your product.1.
Alternatively, any Wi-Fi device can now access the Internet through your TP-Link N router by using the SSID and Password set up in the above steps. All other LAN ports on your TP-Link N router will now grant devices Internet access. Use an Ethernet cable to connect the main router to your TP-Link N router through their LAN ports (any LAN ports may be used). Go to System Tools - > Reboot and select Reboot to reboot the device.ħ. Go to DHCP - > DHCP Settings and select Disable the DHCP Server. Note: If using a dual band router, repeat this process for the 5GHz band as well.ĥ. WPA/WPA2-Personal is recommended as the most secure option. Go to Wireless -> Wireless Security and configure the wireless security. Go to Wireless -> Wireless Settings and configure the SSID (Network name). Note: After changing the LAN IP address, a reboot will be required and you will need to log into the TP-Link N router with the new IP address.ģ.
This IP address should be outside the main router’s DHCP range.Įxample: If your DHCP is 192.168.2.100 -192.168.2.199 then you can set the IP to 192.168.2.11 Go to Network -> LAN on the side menu and change the LAN IP address of your TP-Link N router to an IP address on the same segment of the main router. Log into the router’s web management page.Ģ. Enjoy! Connect to the wireless network by using the SSID (wireless name) and password of the router.ġ. Note: If you want to change the default SSID (network name) and the password, please follow Quick Setup to complete the configuration.Ħ. How to change to Access Point mode: Go to ( Advanced)-> Operation Mode or Advanced-> System Tools-> Operation Mode. After successfully login, select Access Point mode and follow the Quick Setup to complete the configuration. Go to Tools menu > Internet Options > Connections > LAN Settings, in the screen that appears, cancel the Using Proxy checkbox, and click OK to finish it.ĥ. Note: If the above screen does not pop up when you use IE Web-browser, it means that your IE Web-browser has been set to a proxy. Use admin for password, and then click Login. Enter in the address bar of a web browser. Connect a computer to the router via an Ethernet cable or wirelessly by using the SSID (network name) and password printed on the bottom label of the router.Ĥ. Connect the router to your wired host router’s Ethernet port via an Ethernet cable as shown below.ģ. Connect the power adapter to the router and turn on the router.Ģ.
0 kommentar(er)
